Press the leveler

Easy laying and leveling

Even thickness and seams

New tile leveling tool

Quick-press leveling design requires no tools

The adjusting wrench can be tightened or loosened

Adjustable wrench, freely controllable tension, easy to operate

TILE REGULATOR

Multiple adjustment points

Multi-point leveling for tiles of different thicknesses, suitable for 8-12mm tiles

Precise seam retention and quick disassembly

Quick-press leveling design requires no tools

Button-type quick-release leveling

Recycle without wasting

After leveling, rotate the T-pin 90° to remove it for reuse

Quickly levels in 1 second, reuses with zero waste

Quenching process for T-shaped steel nails

Practical, high-strength, non-deformable, and won't damage bricks when rotated

Replaceable T-type steel needle

Extend service life during use

If the steel nails are found to be deformed or damaged, they can be replaced at will

1. Use a Phillips screwdriver to remove the screws

2. After removing the screws, simply replace the T-bolts

High strength PP material

It is not easily deformed or cracked by accidental stepping during construction and is impact-resistant

Product parameters

Suitable for 8-12mm thick tiles; recommended to use with a crosshair.
Multiple uses are recommended for one tile grout line

Operation steps

1. Adjust the position of the L-shaped needle, leaving a seam allowance of ≥1.5mm. Using it in conjunction with a cross-stitch will yield better results

2. Insert the L-shaped needle along the gap, rotate it 90 degrees to secure the needle to the bottom of the brick, and then press down the handle to level it

3. Within 3-5 hours of application, before the tile adhesive has fully cured, rotate the tile 90 degrees in the reverse direction to remove it

4. Achieving a leveled surface results in a smooth and aesthetically pleasing tile surface